2015 – Current
- C. Urbanski, “Iterative Learning Control of Direct Write Additive Manufacturing Using Online Process Monitoring,” 2023.
- K. Russell, “Modeling and Control of Thermal Management Systems on Electric Vehicles,” 2022.
- R. Smith, “Dynamic Modeling and Control of a Hybrid Electric Quadrotor Powertrain and Thermal Management System,” 2022.
- K. Kuipers, “Robust Bead Width Manipulation and Control for Military Additive Construction Operations in Expeditionary Environments,” 2022.
- P. Renkert, “Component-Based Design Optimization of Multirotor Aircraft,” 2022.
- C. Laird, “Modeling, Control, and Design of Hybrid Electrical and Thermal Energy Storage Systems,” 2021.
- C. Aksland, “Modular Modeling and Control of a Hybrid Unmanned Aerial Vehicle’s Powertrain,” 2019.
- S. Igram, “Low Temperature Manufacturing of Ferrite-Epoxy Inductor Cores by Micro-Robotic Deposition,” 2018.
- A. Armstrong, “Modeling and Control of an Easy-to-Use Direct Write Printing System for Fabrication of Bone Scaffolds,” 2017.
- P. Tannous, “Dynamic Temperature Estimation of Power Electronics Systems,” 2017.
- S. Kieffer, “Advanced Techniques for Chemical Gradient, Eutectic Metal, and Crystallized Polymer Film Additive Manufacturing,” 2017.
- M. Kawamura, “Dynamic Modeling and Hardware in the Loop Testing of Chemical Processes,” 2017.
- B. Keating, “Model Free Real-Time Optimization for Vapor Compression Systems,” 2017.
- H. Pangborn, “Dynamic Modeling, Validation, and Control for Vapor Compression Systems,” 2015.
- K. Amber, “New Components for Dynamic Modeling of Transient Thermal Systems,” 2015.
- L. Gonzales, “Dynamic Modeling and Simulation of Frost and Defrost Conditions for Refrigeration Systems,” 2015.
2012 – 2014
- M. Williams, “A Hierarchical Control Strategy for Aircraft Thermal Systems,” 2014.
- J. Koeln, “A Decentralized Control Design Approach to a Class of Large-Scale Systems,” 2013.
- S. Mannen, “Improvements to the Electrohydrodynamic Jet Printing Process,” 2013.
- M. Kania, “A Thermodynamics Based Analysis of Exergy Destruction in Vapor Compression Cycle Systems,” 2013.
- J. Fasl, “Modeling and Control of Hybrid Vapor Compression Cycles,” 2013.
2009 – 2011
- E. Sutanto, “Design and Fabrication of Multimaterial Electrohydrodynamic-Jet Deposition System“, 2011
- N. Liu, “Identification and control of an automated off highway agricultural vehicle“, 2011.
- R. J. Otten, “Superheat control for air conditioning and refrigeration systems: Simulation and experiments“, 2010.
- V. Chandan, “Modeling and Control of Hydronic Building HVAC Systems“, 2010.
- B. Li, “Dynamic Modeling and Control of Vapor compression Cycle Systems with Shut-Down and Start-Up Operations“, 2009.
- T. O. Deppen, “Modeling, Simulation, and Control of a Hybrid Hydraulic Powertrain“, 2009
- N. Jain, “Dynamic Modeling and Validation of a Commercial Transport Refrigeration System“, 2009.
2006 – 2008
- S. Tyson, “Feedback Frameworks for Active Suspensions with Electrohydraulic Actuator Dynamics”, 2008.
- B. E. Helfrich, “Coordinated Design of H-infinity Feedback and Iterative Learning Control with Application to Nanopositioning Systems“, 2008.
- S. D. Manwaring, “Dimensional Analysis in the Design and Control of Fluid Power Systems“, 2008.
- D. Hoelzle, “Reliability Guidelines and Flowrate Modulation for a Micro Robotic Deposition System”, 2007.
- A. Montgomery, “Optimizing the Efficiency of Electrohydraulic Powertrains”, 2006.
- K. Barton, “Cross Coupled ILC Design for Precision Motion Control“, 2006.
- M. Keir, “Dynamic Modeling Control and Fault Detection in Vapor Compression Systems“, 2006.
- B. Morgan, “Dimensional Analysis and Control of Hydraulic Servovalves“, 2006.
- B. Eldrege, “Improving the Accuracy and Scope of Control-Oriented Vapor Compression Cycle System Models“, 2006.
2003 – 2005
- Y. Li, “Dimensional Analysis for Control“, 2005.
- B. Edler, “Anti Lock Brake Control Strategies for Off Highway Trucks“, 2005.
- P. Gupta, “Powertrain Optimization and Multivariable Robust Controller Design for an Earthmoving Vehicle Powertrain“, 2005.
- D. Bristow, “Modeling and Control of a Microscale Robotic Deposition Manufacturing System“, 2003.
- M. Polley, “Experimental Study of Size Effects on Steady State Pneumatic Tire Behavior“, 2003.
- N. Ploplys, “Wireless Feedback Control of Mechanical Systems“, 2003.
- R. Shah, “Dynamic Modeling and Control of Single and Multi-Evaporator Subcritical Vapor Compression Systems“, 2003.
- D. Carter, “Load Modeling and Emulation for an Earthmoving Vehicle Powertrain Simulator“, 2003.
- K. Smith, “Control of SMART Mesoflaps in a Wind Tunnel Environment”, 2003.
2000 – 2002
- R. J. Thacher, “Hybrid and Fule Cell Powertrains for Off-Highway Machines: A Modeling and Controls Perspective”, 2002.
- B. P. Rasmussen, “Reduced Order Control-Oriented Modeling of Vapor Compression Systems“, 2002.
- S. Sonneberg, “Modeling of a Wheel Loader Implement and Steering Systems and Simulation of a Typical Loading Cycle”, 2001.
- M. L. Tharayil, “Modeling and Control of a Smart Material Mesoflap System for Shock Boundary Layer Interaction Control“, 2001.
- E. A. Prasetiawan, “Modeling, Simulation and Control of an Earthmoving Vechicle Powertrain Simulator“, 2001.
- C. Gwynn, “Control of Secondary Oscillations in Shock/Vibration Isolation”, 2000.
- P. Crisman, “Modeling Analysis and Control of a Flop System for Shock Boundary Layer Interaction Control“, 2000.
- H. W. Ng, “Iterative Learning Control and Bumpless Transfer for an Electro-Penumatic Servo System“, 2000.
- D. P. Lynch, “Velocity-Scheduled Driver Assisted Control of a Four-Wheel Steer Vehicle“, 2000.
- T. D. Hull, “An Investigation of Motorcycle Stability and Control”, 2000.
- B. J. Rosenthal, “The Dynamic Analysis and Control System Design of a Hydroski”, 2000.
1997 – 1999
- S. N. Brennan, “Modeling and Control Issues Associated with Scaled Vehicles“, 1999.
- R. Liu, “Nonlinear Control of Electro-Hydraulic Servosystems: Theory and Experiment“, 1998.
- M. A. Pomykalski, “Control of a Class of Nonlinear Systems Subject to Periodic Exogenous Signals“, 1998.
- H. Havlicsek, “Iterative Learning Control of Injection Molding” 1998.
- W. Langson, “Optimal and Suboptimal Control of a Class of Nonlinear Systems“, 1997.
- M. C. Depoorter, “Development, Experimentation and Control of a Small Scale Vehicle Dyanmics and Control Laboratory“, 1997.
